切坯机特点：强度高，推力大，大量运用于煤矸石、页岩硬塑、半硬塑挤出。大海切坯机适合各种泥料的软硬塑泥条，对高含沙量等劣质土节油效果突出。过软泥条应提前声明，使用加密滚筒台面。。切条机系粘土砖生产成型的配套设备，主要作用市把挤出的泥条切成一定的长度，并将切下的泥条送倒切坯机上。

   切坯机的结构特点

   切坯机结构简单、操作方便、使用灵活，采用飞轮结构。减少能源消耗、切割速度快、切割面光滑、宽度均匀，并可按需尺寸任意调整。
 

Structural characteristics
Automatic cut oblique never let go the wrong equipment, no adjustment.
Stainless steel roller automatic dynamic table in place of mud, avoiding waste dump to save the table than the ordinary flat Cayou 70/100%.
Stainless steel push plate surface cracks wear and longer life 3 times.
Orientation angle +-driven arc so that wire into the slot and accurate, with an average reduction of 70% broken wire.
High wear-resistant materials technology guide rod for hard chrome plating, with the composite guide bearing, resistance, long life.
Buffer storage device to absorb recoil shock, and will recoil impact energy into a driving force to push billet.
High strength, large thrust applied to a large number of coal gangue shale hard plastic, semi-hard plastic extrusion.
Suitable for a variety of clay materials of hard and soft plastic clay soil of high sand content and other fuel-saving effects of low-quality outstanding. Guo ooze the Ordinance should be declared in advance, the use of encryption roller table.